Agi-security SYS-16A901 User Manual Manual do Utilizador descarregar pdf (Página 42)

100

101

MAIN MENU

7) RECORD CONFIG

Click “SETUP” to enter the setting page individually for manual record, event record and timer record.

For details, please refer to “5.1.1 GENERAL” at page 19.

5.4.7 DEVICES

ADVANCED CONFIG

CAMERA CH1 CH2 CH3

CH4

CH5

CH6

CH7

CH8

CH9

CH10

CH11  

DETECTION DEVICE PTZ 

ALERT ID 00

NETWORK PROTOCOL NORMAL 

DISPLAY RATE 2400 

RECORD

DEVICES

DCCS

IVS

NOTIFY

EXIT

1) DEVICE

For the PTZ camera, select “PTZ”.

For a zoom lens control camera:

The DVR will detect it automatically and display its model number here.

To configure the parameters for a zoom lens control camera, please refer to “5.4.8 DCCS” at page 37. Different zoom lens control

came

ras might have different parameter settings. For details, please refer to their own user manuals.

2) ID

Click the current value to set the ID number (0 ~ 255) for the connected PTZ camera if necessary.

Make sure the ID setting of the camera is the same as the setting here, or the DVR will not be able to control

the device.

Note: To know the default ID of the PTZ camera, please refer to its user manual.

3) PROTOCOL

Select NORMAL (our protocol), P-D (PELCO-D) or P-P (PELCO-P) protocol.

4) RATE

Select the baud rate for the connected PTZ camera (2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200).

Make sure the baud rate setting of the camera is the same as the setting here, or the DVR will not be able to

control the device.

Note: To know the default baud rate of the PTZ camera, please refer to its user manual.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 458 459

Comentários a estes Manuais

Sem comentários

Agi-security SYS-16A901 User Manual Manual do Utilizador Página 42

Comentários a estes Manuais