Agi-security SYS-16A901 User Manual Manual do Utilizador descarregar pdf (Página 36)

MAIN MENU

2) SS (Spatial Sensitivity)

“SS” is to set the sensitivity for detecting the size of one object (the number of the grids) on the screen. The

smaller the value is, the higher sensitivity for motion detection.

The highest sensitivity setting is 00, and the lowest sensitivity setting is 15. The default setting is 03.

Note: The default setting of SS is 03, which means once an object is detected more than 3 grids, the

system will get triggered. So the value of SS must be less than the number of grids that you set

up for the motion detection area.

3) TS (Time of Sensitivity)

“TS” is to set the sensitivity regarding how long one object stays in the detection area and triggers the

recording. The smaller the value is, the higher sensitivity for motion detection.

The highest sensitivity setting is 00, and the lowest sensitivity setting is 15. The default setting is 02.

4) MOTION

Select if you want to activate the motion detection function for the selected channel (ON/OFF).

5) ALARM

Select N.C./ N.O depending on your installation need. The default alarm value is OFF.

6) AREA

Click “EDIT” to set the motion detection area.

There are 16 × 12 grids per camera for all channels. Pink blocks represent the area that is not being

detected while the transparent blocks are the area under detection.

5.4.3 ALERT

ADVANCED CONFIG

CAMERA EXT. ALERT ON

DETECTION INT. BUZZER OFF

ALERT KEY BUZZER ON

NETWORK VLOSS BUZZER ON

DISPLAY MOTION BUZZER ON

RECORD ALARM BUZZER ON

DEVICES HDD BUZZER ON

DCCS ALARM DURATION (SEC) 5 

IVS HDD NEARLY FULL (GB) 5 

NOTIFY HDD OVERHEAT ALERT (°C) 60 

EXIT

1) EXT. ALERT

Select to enable or disable the sound when any external alarm is triggered (ON / OFF).

2) INT. BUZZER

Select to enable or disable the sound (ON / OFF) for all internal buzzers: KEY BUZZER, VLOSS BUZZER,

MOTION BUZZER, ALARM BUZZER, and HDD BUZZER.

Note: When this item is set to “OFF”, item 3) to item 7) will be disabled even though they are set to ON.

3) KEY BUZZER

Select to enable or disable the sound when pressing the buttons on the front panel (ON / OFF).

4) VLOSS BUZZERD

Select to enable or disable the sound when video loss happened (ON / OFF).

5) MOTION BUZZER

Select to enable or disable the sound when any motion alarm is triggered (ON / OFF).

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 458 459

Comentários a estes Manuais

Sem comentários

Agi-security SYS-16A901 User Manual Manual do Utilizador Página 36

Comentários a estes Manuais